Centrifugal Compressor – Required Polytrophic Horsepower

This application uses initial impeller speed and final impeller rotational speed to determine final flow rate, compression head and final shaft Horsepower (HP). One drawback is the difficulty to determine efficiency which is based on the ratio of specific heat for the gas being used in the compressor.

PTLB Compressors 2.3_Intro.png
π»π‘ƒΒ βˆ’ Adiabatic Compressor Horsepower
π‘„Β βˆ’ Gas Flow Rate[MMSCFD]
𝑇1Β βˆ’ Suction Temperature[°𝑅]
𝑇2Β βˆ’ Discharge Temperature[°𝑅]
Z1Β βˆ’ Compressibility of Gas at Suction Conditions
Z2Β βˆ’ Compressibility of Gas at Discharge Conditions
π‘§π‘Žπ‘£π‘”Β βˆ’ Average Compressibility Factor
π‘˜ =Β PTLB Compressors K Formula.pngΒ βˆ’ Specific Heat Ratio
π‘›π‘Β βˆ’ Compressor Polytropic Efficiency
𝑃1Β βˆ’ Gas Suction Pressure[psia]
𝑃2Β βˆ’ Gas Discharge Pressure[psia]
CNGA/GPSA Compressibility Factor Approximation
PTLB Compressors 2.2_Intro 2.png
π‘Β βˆ’ Compressibility Factor
π‘ƒΒ βˆ’ Pressure(psi)
π‘‡π‘“Β βˆ’ Gas Flowing Temperature[°𝑅]
This approximation will produce results sufficiently accurate for preliminary calculations.
Brake Horsepower
PTLB Compressors 2.2_Intro 3.png
π‘›π‘šΒ βˆ’ Mechanical EfficencyΒ π‘›π‘šΒ = 0.95/0.98

 

Input Parameters

  1. To create a new case, click the β€œAdd Case” button
  2. Select the Centrifugal Compressor – Required Polytropic Horsepower application from the Pipeline Compressor module.
  3. Enter Case Name, Location, Date and any necessary notes.
  4. Fill out all required fields.
  5. Make sure the values you are inputting are in the correct units.
  6. Click the CALCULATE button.

  • Base Pressure(psi)
  • Base Temperature(Β°F)
  • Suction Pressure(psi)
  • Suction Temperature(Β°F)
  • Discharge Pressure(psi)
  • Capacity/Required Flow Rate(ft/sec.)
  • Gas Specific Heat Ratio
  • Gas Specific Gravity (Relative to air)
  • Adiabatic Efficiency (0.75 – 0.79)
  • Mechanical Efficiency (0.95 – 0.98)
  • Polytropic Efficiency
  • Z1 – Compressibility Factor at Suction Conditions
  • Z2 – Compressibility Factor at Discharge Conditions

PLTB Compressors 2.3_Input Rev_090120.png
 

Outputs/Reports

  1. View the results.
  2. If an input parameter needs to be edited be sure to hit the CALCULATE button after the change.
  3. To SAVE, fill out all required case details then click the SAVE button.
  4. To rename an existing file, click the SAVE As button. Provide all case info then click SAVE.
  5. To generate a REPORT, click the REPORT button.
  6. The user may export the Case/Report by clicking the Export to Excel/PowerPoint icon.
  7. To delete a case, click the DELETE icon near the top of the widget.

  • Polytropic Exponent
  • Discharge Temperature(Β°F)
  • Zavg – Average Compressibility Factor
  • Adiabatic Head (ft lbf/lbm)
  • Adiabatic GHP per Unit of the Flowrate(HP/MMSCFD)
  • GHP – Adiabatic Gas Horsepower(HP)
  • BHP – Adiabatic Brake Horsepower(HP)
  • ACFM – Actual Flow Rate for Sizing(ftΒ³/min)

PLTB Compressors 2.3_Output Rev_090120.png

Related Links

Pipeline HUB β€” User Resources

Table of Contents
Table of Pages
Table of Contents
  1. Pipeline HUB User Resources
  2. AC Mitigation PowerTool
  3. API Inspector's Toolbox
  4. Horizontal Directional Drilling PowerTool
  5. Crossings Workflow
  6. Hydrotest PowerTool
  7. Pipeline Toolbox
  8. Encroachment Manager
  9. PRCI AC Mitigation Toolbox
  10. PRCI RSTRENG
  11. RSTRENG+
  12. Ad-hoc Analysis
  13. Database Import
  14. Data Availability Dashboard
  15. ESRI Map
  16. Report Builder
  17. Crossings Workflow
  18. Hydrotest PowerTool
  19. Investigative Dig PowerTool
  20. Hydraulics PowerTool
  21. External Corrosion Direct Assessment Procedure - RSTRENG
  22. Canvas
  23. Definitions
  24. Pipe Schedule and Specifications Tables