Unstrained Pipeline Stress Analysis

Unrestrained pipes are unburied or spans where the pipe is bedded or supported beam. These could be designed or mother nature exposing the pipe due to flooding or other natural causes.

Allowable expansion stresses sustained and occasional loads that are greater than 80% stress. Thermal expansion greater than 75% of SMYS

Hoop Stress

𝑆_𝐻 − Hoop stress(psi)
𝑃 − Pipe internal pressure(psi)
𝐷 − Pipe outside diameter(in)
𝑡 − Pipe wall thickness(in)

Longitudinal Stress due to Internal Pressure

𝑆_𝑃 − Longitudinal stress due to internal pressure(psi)
𝑆_𝐻 − Hoop stress(psi)

Nominal Bending Stress

𝑆_𝐵 − Nominal bending stress(lb/in)
𝑀 − Calculated bending moment
𝑍 − Pipe section modulus(in3)

Stress due to Axial Loading

𝑆_𝑋−Axial loading stress(lb/in)

𝑅 −External for axial component(lb)
𝐴 −Pipe metal cross-sectional area(in2)

Net Longitudinal Stresses

𝑆_𝐿 − Net longitudinal stress in restrained pipe(psi)
Note: The maximum permitted value for 𝑆𝐿 is 0.75ST
𝑆 − Specified minimum yield strength(psi)
𝑇−Temperature derating factor

Input Parameters

Select the Unrestrained Pipeline Stress Analysis application from the Steel Pipe – Design and Stress Analysis module
To create a new case, click the “+” button
Enter Case Name, Location, Date, and any necessary notes
Fill out all required fields
Make sure the values you are inputting are in the correct units
Click the CALCULATE button

Nominal Pipe Size(in)
Wall Thickness(in) and pipe grade (if pipe grade is unknown use Grade A 24000)
T – Temperature Derating Factor(°F)
Nominal Bending Stress(psi)
Stress due to Axial Load(psi) while providing Poisson’s Ratio
Young’s Modulus of Elasticity(in.)
Thermal Expansion Coefficient(1/°F)

Outputs/Reports

View the results
If an input parameter needs to be edited be sure to hit the CALCULATE button after the change
To SAVE, fill out all required case details then click the SAVE button
To rename an existing file, click the SAVE As button. Provide all case info then click SAVE
To generate a REPORT, click the REPORT button
The user may export the Case/Report by clicking the Export to Excel/PowerPoint icon
To delete a case, click the DELETE icon near the top of the widget

Hoop Stress(psi)
Longitudinal Stress due to Internal Pressure(psi)
Net Longitudinal Stress(psi)
Maximum Permitted Longitudinal Stress(psi)